BTR Truck Norris Cam Kit – Everything You Need in One Box
The Brian Tooley Racing Truck Norris cam is the most popular LS truck camshaft on the market: real lope, strong midrange torque, and it works with the factory torque converter. This is the complete Truck Norris cam kit: cam, valve springs, LS7 lifters, trays, pushrods and the install kit, so you aren't chasing parts mid-install.
Truck Norris Cam Specs
- Duration @ .050": 212° / 22X°
- Valve lift: .552" / .552"
- Lobe separation: 107° LSA
- Idle: aggressive lope, street drivable
- Converter: works with stock converter (tune required)
What's in the Kit
- BTR Truck Norris LS truck camshaft (made in the USA)
- BTR SP011 beehive valve springs (.560" lift capable)
- LS hat-style valve seals
- Chromoly 7.400" pushrods
- BTR Delphi LS7 lifters and lifter trays
- Cam install kit: water pump gaskets, front main seal, front cover gasket, balancer bolt
- YOUR CHOICE OF HEAD GASKETS (select above)
Fitment
1999–2013 GM Silverado, Sierra, Tahoe, Yukon, Suburban and Avalanche with Gen III/IV LS truck engines: 4.8L, 5.3L, 6.0L and 6.2L. Not for 2014+ direct-injection (L83/L86) engines.
Which Truck Norris Do You Need?
- Complete kit (this page) – best for most builds; everything for a cam swap.
- Truck Norris cam & spring kit – you already have lifters/trays and an install kit.
- Truck Norris camshaft only – you already have springs that handle .552" lift.
- Truck Norris NSR (No Springs Required) – keep factory springs, .500" lift.
Truck Norris FAQ
Do I need new valve springs for the Truck Norris cam?
Yes for the standard Truck Norris (.552" lift); springs are included in this kit. If you want to keep stock springs, choose the Truck Norris NSR cam.
Will it work with my stock torque converter?
Yes. Truck Norris was designed to run on the OEM converter. A tune is required with any cam swap.
What is NSR?
"No Springs Required": a lower-lift (.500") Truck Norris profile that is safe on factory LS truck springs.