BTR Delphi LS7 Lifters and Trays – Full Set of 16 Lifters + 4 New Trays
Everything you need to replace the lifters on an LS during a cam swap or AFM/DOD delete: a full set of 16 Brian Tooley Racing Delphi LS7 hydraulic roller lifters (like GM 12499225) and 4 new lifter trays, in one box.
What's Included
- 16 BTR Delphi LS7 hydraulic roller lifters (BTR X12499225-16)
- 4 new LS lifter trays (BTR 95365-4)
Why LS7 Lifters?
The LS7 lifter was developed for the Corvette Z06 and is the go-to replacement lifter for LS cam swaps. It is a drop-in, non-AFM hydraulic roller lifter that handles the higher spring pressure and RPM of an aftermarket cam better than a worn stock lifter.
Fitment
- GM Gen III / Gen IV LS engines: 4.8L, 5.3L, 5.7L, 6.0L, 6.2L
- Gen V LT engines
- Small block Chevy and LT1 applications that came with factory hydraulic roller lifters
- Non-AFM/DOD only. AFM/DOD engines need a full AFM delete (non-AFM cam, lifters, trays and a DOD delete valley cover) and a tune.
Before You Install (BTR's Prep Procedure)
- Unpack the lifters and check each body and roller wheel for damage.
- Wash them in a parts-washer solvent or mineral spirits to remove the stiff packing grease.
- Spin each roller and check for binding or roughness.
- Soak them in engine oil (the BTR packaging works as a soak tray) to lubricate the axle bearings and internals.
LS7 Lifter FAQ
Do I need new lifter trays?
Yes. BTR always recommends new factory-style trays when installing new lifters, which is why this kit includes them. Already have new trays? Get the BTR LS7 lifters only.
Can I use these for an AFM/DOD delete on my 5.3?
Yes, as part of a full delete: non-AFM cam, these lifters and trays, a DOD delete valley cover, and a tune to turn AFM off.
Are these the same as GM 12499225?
They are Delphi-made LS7-style lifters that replace GM 12499225.
Need spare trays?
BTR lifter trays, set of 4 (95365-4).
Per BTR: no warranty on lifters.