Link G4X 350ZLink N350X Plug-In ECU - Nissan 350Z / Infiniti G35 (210-4000)
Brand New OEM GENUINE Link Engine Management Standalone ECU.
The Link G4X 350ZLink (N350X) is a professional-grade engine management solution designed for seamless integration with the VQ35DE platform. This plug-and-play unit replaces the factory ECU, providing total control over fuel, ignition, and motorsport features without the need for a patch harness.
- Product: Link G4X 350ZLink N350X Plug-In ECU
- Fitment: Nissan 350Z Z33 / Infiniti G35 V35 (VQ35DE)
- Condition: Brand New / Genuine Link Engine Management
- Part Number: 210-4000
⚠️ CRITICAL INSTALLATION & FITMENT DATA
This ECU is designed specifically for the VQ35DE engine with a single throttle body. It facilitates the complete removal of the factory Mass Air Flow (MAF) sensor in favor of an onboard 4-bar MAP sensor for Speed Density tuning. Professional dyno tuning is required after installation.
Compatibility & Reference Guide:
- Applicable Engines: VQ35DE (Single Throttle) and VQ35DE Revup.
- Chassis Codes: Nissan 350Z (Z33) 2002-2006, Infiniti G35 (V35) 2003-2006.
- Transmission: Support for both Manual and Automatic models.
- HR Models: Not compatible with 2007-2008 VQ35HR (Dual Throttle) models.
G4X PlugIn Key Features:
- Advanced Mapping: Up to 6D fuel and ignition mapping with individual cylinder correction.
- Cam Control: Closed loop cam control.
- OEM Integration: Supports OEM trigger patterns and drive by wire. Most factory features supported.
- Boost Management: 5D boost control with three switchable tables referenced to gear, speed, or throttle position.
- Motorsport Suite: Built-in Antilag, Launch Control, and Flat Shift capabilities.
- Data Logging: Massive 512MB on-board memory for stats recording and high-resolution logging.
- Safety: Advanced Knock control with "windowing" for precise detonation detection.
- QuickTune: Automated fuel tuning for faster, more efficient dyno sessions.
I/O Expansion Options:
The N350X provides two expansion connectors for additional sensor inputs and auxiliary outputs:
| Expansion 1 Pinout | Expansion 2 Pinout |
|---|---|
| Gnd (Sensor Ground Only) | An Temp 4 (Temp Sensor Input) |
| +5V Low Current Supply | DI 11 (Digital Input) |
| Aux 15 & Aux 14 (Outputs) | Aux 16 & Aux 8 (Outputs) |
| DI 8 & DI 9 (Digital Inputs) | +5V Low Current Supply |
| An Volt 8 (Analog 0-5V Input) | Gnd (Sensor Ground Only) |
