Haltech Platinum PRO AP1 S2000 HT-055050


In Stock. Item Can Ship Today. Weekday shipping cutoff is 3pm EST.

SKU: HAL HT-055050 Category:


? Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
? Uses the cars factory sensors
? Supports Honda’s VTEC Control
? Supports Sequential Injection (peak and hold) and Direct fire ignition
? Windows 2000, XP, Vista, Windows 7 compatible software
? Real time programming, instant hesitation free adjustment while engine is running
? Fully user definable 32 x 32 mapping
? Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
? Diagnostic trouble code storing & Check engine light control(Access through laptop only )
? Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
? Wideband ?auto tuning? using user definable target AFR table
? USB and CAN Communication Port

Factory Outputs:
? 4 x Fuel Injector outputs
? 4 x Ignition outputs
? VTEC, Coolant Gauge, AC Clutch Relay, Idle Control
? Thermo Fan, Check Engine Light, Fuel Pump

Factory Inputs:
? MAP sensor, Throttle Position Sensor, Knock Detection sensor,
? Coolant Temperature sensor, Vehicle Speed Sensor,
? Air Temperature sensor, Power Steering Switch, Narrowband Oxygen sensor

Expansion I/O*:
? 2 x Analogue Voltage inputs
? 2 x Analogue Temperature inputs
? 4 x Digital Outputs
*Optional auxiliary harness required to be purchased Haltech Part # HT040003

? VTEC On – INJ / IGN Tables
? VTEC On – CAM Table
? Closed Loop O2 Control
? Decel Cut Over Boost Rev Limiter
? Closed & Open Loop Boost Control
? Gear Setup
? Transient Throttle Enhance
? Knock Control
? Long Term Fuel Trim

Correction Tables: Fuel Ignition Boost:
? Cranking
? Air Temp Target Correction
? Zero Throttle Gear Correction
? Cylinder Trim
? TPS Correction
? Generic Correction 1
? Generic Correction 2
? Gear Correction
? Post Start
? Air Temp Duty Correction
? Post Start

? Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds,
6 channels of data
? Max 20 channels logging capability
? Tune can be password protected in software
? Rugged anodized aluminum casing

Power Requirements:
Source: 8.6 to 16.5 Volts DC
Consumption: 530mA @ 12Volts DC

Physical Dimensions:
ECU Dimensions Length: 154mm (176mm with MAP nipple)
Width: 158mm Height: 42mm Weight: 680g (1.5 lb)

Honda S2000 (AP1)

The Kit includes:
Pro Plug-in ECU, USB Cable, Programming Software CD, Quick Start Guide, Instruction Manual (on CD)

Please contact us for international shipping.