Dynosty has offered a Plug and Play solution for the Nissan 350Z VQ35HR for some time, and it’s better than ever with the recent update to Haltech Elite 2500 EMS! This custom Haltech Elite VQ35HR standalone system offers live fuel and ignition control as well as additional features including: Onboard Map Sensor Onboard Logging Advanced Boost Control Bank-Specific O2 Control with cell-by-cell long term learning Knock Control with cell-by-cell learning Fuel Pressure Compensation Fuel Pump Staging Nitrous Control and much much more!
AEM released a plug and play standalone solution for the Coyote Racing Factory Controls Pack, which allows you to replace the Ford computer with the AEM Infinity standalone. AEM Infinity standalone has full control of the fuel injectors, ignition timing, quad cam control and dual drive by wire control.
Dynosty is an AEM Infinity authorized dealer and factory-trained pro dyno tuning facility. Contact us for pricing and availability.
MoTeC announced their new M1 Plug and Play standalone for the Toyota 86, Scion FR-S and Subaru BRZ. The MoTeC system will completely replace the stock computer, and allow full control of the port fuel injectors, direct injection, ignition timing, drive by wire throttle system, quad cam control and more. Advanced features such as traction control, launch control, antilag and more will be on board as well. The MoTeC M1 ecu will have CAN communication on board to communicate with the factory components such as body control module and dash. Pricing is set around $3500. Pre-order your FR-S BRZ MoTeC today on FRSMOD.com
We got our hands on the new Haltech Elite standalone engine management and are very excited for this latest Haltech offering. The new Haltech Elite standalone comes in a new case that is submersible, fully waterproof. 8 Fuel Injection Outputs (high or low impedance) and 8 Ignition Ouputs are onboard the Haltech Elite, along with 28 Digital Outputs and 10 Analogue Voltage Inputs. The Haltech Elite comes with an oscilloscope to help quickly identify trigger types and for diagnostics. 6 Engine Position Inputs are on-board the Haltech Elite as well, with extensive trigger support and ability to quickly setup new crank and cam trigger types.
Other features you can look forward to on the new Haltech Elite series engine control: Drive By Wire Throttle Control Cruise Control Quad Cam Control Knock Control, dual channel Auto Tune with fuel and ignition learning (short term and long term) E85 Flex Fuel support adjusts fuel, ignition, boost and more O2 Air Fuel Control Idle Control Closed Loop Boost Control with advanced strategies (boost by gear etc) Antilag and Launch Control Datalogging, includes on-board ECU logging, live PC logging, and external USB datalogging Black Box Logging – additional logging that is always active Multiple User Logins to restrict areas of the Haltech Elite based on passwords Engine Protection limits for sensors such as fuel pressure vs target fuel pressure, air fuel ratio lean protection, oil pressure and more Multiple Profiles on board, up to 4 completely separate calibrations are stored so the Haltech Elite can be used in different vehicles without connecting and changing maps
Haltech Elite will be available March-April 2014. Stay tuned to Dynosty for more information on the Haltech Elite as it becomes available.
Recently we completed two Z32 300ZX Twin Turbo dyno tunes. Both were updated from reflashed stock computers to the much superior Haltech Platinum Pro Plug-In standalone engine managements. The Haltech EMS is a complete replacement for the stock computer and plugs directly into the stock harness. The standalone also enables live speed density tuning, so there is no need for maf splitters or waiting to mail tunes in and out. The end result of both was better performance and improved drivability.
Z32 Haltech Pro Plug-In Installed in place of stock computer:
The first Z32 300ZX was on stock turbos with upgraded Nismo injectors. The results was an impressive 337whp and almost matching torque.
The next Z32 300ZX came in with upgraded GT28RS twin turbos and yielded 429 horsepower at the wheels!
Dynosty is a top-tier Haltech distributor and installation/tuning facility. We would love to earn your business, give us a call to schedule your Haltech upgrade and tune: 502-384-8882.
Our first turbo Scion FR-S is complete and a low boost dyno tune yielded 230 WHP on 0.3bar (4psi), a gain of 77 horsepower at the wheels on our Dyno Dynamics dynamometer (stock baseline dyno of 153 WHP). This was performed on the stock FA20 engine.
This turbocharged FR-S build consists of: · Dynosty Scion FR-S Subaru BRZ Single Turbo Kit with Tial GT2871R Turbocharger · Tial MVR 44mm Wastegate and Tial Blow Off Valve · Injector Dynamics 850cc Fuel Injectors running E85 · Haltech Platinum Sport standalone engine management · Haltech Wideband and Haltech Advanced Boost Control System · Dyno Tune by Hal at Dynosty
Stay tuned for more turbo Scion FR-S and Subaru BRZ videos and dynos as we chart new territory with increased boost levels.
This white 2012 Hyundai Genesis coupe r-spec 2.0T came in for some mods to boost the power output of the 2.0L turbocharged Theta engine. Baseline dyno showed 178whp on our Dyno Dynamics, at which time we planned the following: Haltech Hyundai Genesis Platinum Pro Plug-In standalone ems (PN HT055045) Injector Dynamics ID 1000cc fuel injectors MXP Downpipe MXP O2 Housing Tune by Hal at Dynosty
LEFT: Picture showing stock Hyundai Genesis injectors compared to ID1000 injectors. RIGHT: MXP downpipe installed on Hyundai Genesis 2.0.
Next, the stock ECU was removed and a Haltech Pro Plug-In ecu was fitted in it’s place. Fuel, ignition, cam timing and boost were dialed in on the Haltech standalone, yielding 232whp on 93octane pump gas – a 54whp or 30% increase in power!
The customer runs the car at SCCA autocross events, and recently took it to Putnam Park road course for a Porsche track day event. He sent a link to the footage along with these kind words, “Here’s a video from the last session on Sunday. I was the only car out there on street tires in that session. The second car I passed is a 2011 GT3 on Hoosier R6’s. Thanks for the help and for the perfect tune.” Check out the footage of this Genesis coupe working on the track:
Dynosty and Haltech are proud to announce the new Haltech Platinum 350Z/G35 Pro Plug-In, a complete OEM ECU replacement! This new standalone ecu completely replaces the stock ecu, uses factory sensors, and performs the factory functions including: Drive By Wire allowing the idle, rev limiter and other throttle-related functions to be tuned. OEM Fan Control, allowing low and high speed fan settings. Fuel Pump Control, prime settings for primary pump and staging for additional pumps. AC control. Stock Gauges and Lights, including Tachometer and CEL with advanced CEL diagnostic signaling or use as shift light or knock light. Perfect for your high performance 350Z needs, covering NA to turbo and nitrous applications – this ECU has it all!
Other new features include: E85 Flex Fuel Support, done right! Run any fuel mixture between gasoline and E98, and Haltech adjusts fuel, ignition and boost appropriately on the fly! Advanced fuel composition tables allow full control of fuel/ignition/boost at each composition level – this is not just a sliding scale style correction. Antilag Launch Control and Rally – build boost at the line and specify what the allowable acceleration rate is after launching. 4 Additional Inputs and 4 Additional Outputs onboard, with room for more via CAN expansion.
We are currently testing these in house and the 350Zs are driving great! Complete control coupled with live tuning makes tuning easy and perfect drivability. 2003-2006 350Z / G35 6speed Manual Transmission Only. 350Z HR and 370Z ECU coming soon (eta in next 12 months) Call Dynosty at 502-384-8882 to order your new Haltech 350Z Plug-In ECU today! Call for best pricing. Wholesale and dealer inquiries welcome. In-house installation and dyno tuning available, as well as travel tuning.
Coming soon: AEM debuted their new Infinity standalone EMS at SEMA 2011. AEM set out to be the best on this one with a no expense spared spec sheet, this ECU is something to look forward to. The ‘Infinity’ universal engine management system will be sold with application specific plug and play harnesses for cars such as the Nissan 350Z, Toyota Supra and more, while others can use a universal wiring harness to incorporate this standalone ems. The AEM Infinity EMS is new from the ground up, and boasts many powerful features including VE tuning, dual drive-by-wire throttle body control, quad cam control, flex fuel support, traction control based on wheel speed or engine acceleration, electronic turbo wastegate boost control, data logging, two-step, three-step, anti-lag and more!
AEM Infinity pricing should be around MSRP $2300, PN 30-7100. EMS details below the picture.
Details on the AEM Infinity ECU: 12 Peak-and-hold Injectors Drivers 10 Ignition Outputs 23 Analog Inputs 8 Digital Inputs 10 Low Side Drivers 3 High Side Drivers 2 Internal Wideband AFR Controllers 2 Adaptive Knock Channels 4 Cam Control Idle Control Boost Control Traction Control Two-Step, Three-Step, Antilag Dual Fuel Pump Control Dual Fan Control 4-Stage Nitrous Control Advanced 1KHZ Datalogging and Analysis, includes 2GB Flash Drive Standard (32GB Max)