HKS Stopper Head Gaskets for FRS BRZ

New product announcement from HKS… Stopper Type Head Gasket for Scion FR-S and Subaru BRZ is underway.

Two gaskets will be offered for the FA20 engine:
NA 12.6:1 Compression Ratio, 0.5mm thickness, 89.5mm bore, opposed bead type – 300HP capable (PN 23001-AT002)
BOOST 12.4:1 Compression Ratio, 0.7mm thickness, 89.5 bore, opposed bead type – 600HP capable (PN 23001-AT003)

Opposed Bead Stopper Type Metal Gasket for the FA20 engine of 86/BRZ provides higher bore sealing durability than a stock gasket. Both types are endurable against high engine output. Stopper structure of the bore seal prevents leakage even under high cylinder pressure at high engine output. Boosted gaskets compression is kept high to maintain high efficiency. Contact surface pressure is improved via a special coating applied to the head side and cylinder side to improve sealing performance when tightening the bolts.

Dynosty Scion FR-S and BRZ Sound Tube Delete Kit

Want to clean up the clutter in your new Scion FR-S or Subaru BRZ engine bay – look no further. The Dynosty sound tube delete allows you to remove the growl tube from your engine bay by providing a billet plug for the intake tube and a rubber cap for the firewall. Road testing revealed a minimal change in cabin noise.

Available now by calling Dynosty at 502-384-8882
$29 + shipping

Buy it now on FRSMOD.com!

Dynosty Sound Tube Delete Kit (includes 1 billet aluminum plug for intake and 1 rubber cap):

Left: Before, Scion FR-S with sound tube. Right: After, with Dynosty sound tube delete kit installed.

Hyundai Genesis on Track after Haltech Tune and Upgrades

This white 2012 Hyundai Genesis coupe r-spec 2.0T came in for some mods to boost the power output of the 2.0L turbocharged Theta engine. Baseline dyno showed 178whp on our Dyno Dynamics, at which time we planned the following:
Haltech Hyundai Genesis Platinum Pro Plug-In standalone ems (PN HT055045)
Injector Dynamics ID 1000cc fuel injectors
MXP Downpipe
MXP O2 Housing
Tune by Hal at Dynosty

LEFT: Picture showing stock Hyundai Genesis injectors compared to ID1000 injectors. RIGHT: MXP downpipe installed on Hyundai Genesis 2.0.

Next, the stock ECU was removed and a Haltech Pro Plug-In ecu was fitted in it’s place. Fuel, ignition, cam timing and boost were dialed in on the Haltech standalone, yielding 232whp on 93octane pump gas – a 54whp or 30% increase in power!

The customer runs the car at SCCA autocross events, and recently took it to Putnam Park road course for a Porsche track day event. He sent a link to the footage along with these kind words, “Here’s a video from the last session on Sunday. I was the only car out there on street tires in that session. The second car I passed is a 2011 GT3 on Hoosier R6’s. Thanks for the help and for the perfect tune.”
Check out the footage of this Genesis coupe working on the track:

Turbo Big Block Wired on FAST XFI

FAST XFI standalone engine management was selected for the big-block big-thumper turbo Malibu, and a Dynosty custom wiring harness brought it one step closer to running down the track.

Scion FR-S Dyno Baseline

Today we strapped Dustin’s Scion FR-S on the Dyno Dynamics to get a baseline reading in stock form. The results were 153whp and 124wtq. Stay tuned for more dyno updates as we begin modifying this project car.

Video:

Scion FR-S Baseline dyno chart with wheel horsepower and torque:

Scion FR-S Basline dyno chart with wheel horsepower and air fuel ratio. Very rich!

New E85 Flex Fuel Content Gauge from Dynosty!

Dynosty is proud to release the new Dynosty E85 Flex Fuel Content Gauge with 0-5v output. This gauge analyzes fuel content in real time and updates the display showing 0-100 % ethanol content. Take the guesswork out of fill-ups with this gauge – know exactly what grade fuel you are running at all times! Low and high warning feature appears if the signal is disconnected or shorted. 0-5v output can be connected to your engine management (if capable) to adjust fuel, ignition and boost based on fuel grade, or switch maps based on pump gas or E85. Please give us a call if you have a question about how to integrate this with your engine management.

Works with GM, Chevy and Haltech flex fuel sensors.

Dynosty E85 Flex Fuel Content Gauge with 0-5v Output, PN DYN G-E85: $169
Haltech Flex Fuel Composition Sensor: $226
Combo kit with Gauge and Flex Fuel Sensor: $368
Combo kit with Gauge, Flex Fuel Sensor, and -6AN in/out fittings: $408

In stock now! Call to order 502-384-8882 or send paypal (shipping to confirmed addresses only!) to sales@dynosty.com

Available in red, amber and blue display colors.

Output specifications:
0.5v = 0% ethanol content
4.5v = 100% ethanol content


*Amber display shown in picture


*Picture demonstrates -6AN fitting on left side and standard fitting on right side.

New GoPro WiFi Accessories

Exciting new releases from GoPro this week:
Wi-Fi Combo Kit, includes wifi bacpak and remote control, PN AWPAK-001, $99
Wi-Fi BacPac, PN AWIFI-001, $59
Call us to order now! 502-384-8882

The Wi-Fi Combo Kit enables remote control, live preview and playback on smartphones and tablets*, live streaming* to the web, and more. The Wi-Fi Combo Kit is compatible with HD HERO2 and Original HD HERO cameras.

Wi-Fi Remote:
Control up to 50 cameras a time, 600’ / 180m range
Full camera control: On/Off, Mode, Shutter, and Settings
Attachment strap, key ring, and charging cable included
Wearable & Waterproof to 10’/3m

GoPro App + Smartphone or Tablet (Coming Soon)

Control your GoPro(s) with your smartphone or tablet
Live preview & playback of videos & photos from your GoPro(s)
Wi-Fi transfer* footage from your GoPro to your smartphone or tablet and share with friends
Live stream your smartphone as a hotspot

Live Streaming + Sharing Directly from Your GoPro (Coming Soon)
Live stream video or share photos and videos directly to the web from your GoPro, wherever you have a network connection (coming soon).

What’s Included In Combo Kit:
Wi-Fi BacPac (with built-in Li-ion Battery)
Wi-Fi Remote (with built-in Li-ion Battery)
Remote Charging Cable
Remote Attachment Key
Remote Attachment Strap
Waterproof Backdoor
Non-waterproof Backdoor
12” USB Charging Cable

NOTE: A product update is REQUIRED before using your Wi-Fi products. The original HD HERO is only compatible with the Wi-Fi Remote. Does not support GoPro App and video + photo live streaming.

* available with a free future downloadable Wi-Fi BacPac product update. Support for using your smartphone as a hotspot may vary from mobile carrier to carrier.